Questions for the 1Z0-590 were updated on : Nov 14 ,2024
Page 1 out of 10. Viewing questions 1-15 out of 141
Question 1
What is the purpose of the use “command” In the CLI?
A. Use a specified server pool as the default for allcommands requiring a server pool argument.
B. Use a specified virtual machine name as the default for all commands requiring a virtual machine argument.
C. Use a specified user name as the default for all commands requiring a user name argument.
D. Use a specified server name as the default for all commands requiring a server argument.
E. Use a specified group name as the default for all commands requiring a group argument.
Answer:
A
User Votes:
A
50%
B
50%
C
50%
D
50%
E
50%
Discussions
0/ 1000
Question 2
What component of Oracle VM Product is specifically responsible for the automatic failover process? A. OCFS2 B. Server Pool Master C. Oracle Clusterware D. utility server E. virtual machine server
Answer:
B //docs.oracle.com/cd/E11081_01/doc/doc.21/e10898/ha.htm
Use the same shared storage. Are in the same OCFS2 or NFS cluster. Are Oracle VM Server Release 2.1.2 or above. Have the same cluster root, which is a specially designated shared storage used for heatbeating in /OVS for an NFS cluster, or /dev/sdd6 for an OCFS2 cluster. The heartbeat file would be located at /OVS/.server_pool_hb for an NFS cluster. There is no heartbeat file for an OCFS2 cluster as one is in-built in the file system. Have the cluster root mounted at /OVS. All other storage may be mounted at the standard location of /OVS/uuid. Have moved any /OVS mount points (set in FSTAB for Releases 2.1 or 2.1.1) to the /etc/ovs/repositories file. All storage, even that mounted at /OVS, must be maintained in the /etc/ovs/repositories file. You can move the mount points to the /etc/ovs/repositories file with the
# /usr/lib/ovs/ovs-cluster-check --alter-fstab Have a shared cluster root at /OVS, and not local, using clustered OCFS2 on SAN, or ISCSI storage, or NFS on NAS. The default local storage is OCFS2, and is notsupported with HA.
Discussions
0/ 1000
Question 3
A low priority guest is using up more of the physical network traffic than desired. Select the two valid network QoS settings for restricting outbound network traffic?
A. [max_rate=lMb/s]
B. [rate=lMb/s@20ms]
C. [rate=250Kb/s]
D. [max_rate=unlimited]
E. [rate=250Rb/s, max rate=1Mb/s]
Answer:
B,C
User Votes:
A
50%
B
50%
C
50%
D
50%
E
50%
Discussions
0/ 1000
Question 4
What two steps would best harden an Oracle VM Server installation?
A. Avoid installing additional software in dom0.
B. Enable firewalling in dom0.
C. Install virus checking software in dom0.
D. Use Trusted Computing Modules for Xen0.
E. Do not share physical network cards between hosts that are on a different subnet.
Answer:
A,E
User Votes:
A
50%
B
50%
C
50%
D
50%
E
50%
Discussions
0/ 1000
Question 5
Networking is not working for several guests on a particular host. Which two commands can help troubleshoot the networking?
A. xm list -1 will show all of the network interfaces for all of the virtual machines, which can be used to see which bridge is having problems.
B. config_network.py -l will show which network interfaces are in use, and which are having problems.
C. brctl show will show the status of each bridge, and which VIFs are connected to it. This canthen be used to determine which bridge is having problems.
D. System-config-network will list the virtual interfaces, which can be inspected to see which are having problems.
E. ifconfig -a will show a list of all network interfaces and their current status, which will help determine which bridge is having problems.
Answer:
C,E
User Votes:
A
50%
B
50%
C
50%
D
50%
E
50%
Discussions
0/ 1000
Question 6
What is the effect of running a server pool restores?
A. When you restore a server pool, all the data stored in the Oracle VM Manager database Isdeleted, and the data in the server pool master and virtual machine servers is used to restock the database.
B. When you restore a server pool, all servers are removed from the pool, and the data in the database is removed, restoring the server pool to its initial state.
C. When you restore a server pool, all the data stored in the server pool master will be deleted, and will be synchronized with the latest information from the Oracle VM Manager database. The server pool master is responsible for updating the individual Oracle VM servers' agent databases.
D. When you restore a server pool, a signal is sent out toeach server in the pool, which responds with the current state of all of the virtual machines it hosts. This data is used to restore the data in the Oracle VM database.
Answer:
C
User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
0/ 1000
Question 7
Which three are part of the JeOS toolkit? A. Linux command to customize the JeOS images and create the template B. JeOS license file C. Enterprise Linux JeOS images to use for the System.img D. Microsoft Windows JeOS images to use for the System.img E. Template reconfiguration scripts F. Red Hat EnterpriseLinux JeOS images to use for the System.img
Answer:
A,B,E Linux command is available to customize the JeOS images and for creating the template you will get a script which will allow to create the template so that template reconfiguration scripts will be the right answer and a license file should be there. So the correct 3 options I specified there.
Discussions
0/ 1000
Question 8
Which statement best describes the pricing metric for Oracle VM configurations?
A. Oracle VM Server support contract is purchased foreach server. Oracle VM Manager is included at no charge.
B. Oracle VM Server license and support contract is purchased for each server. Oracle VM Manager is included at no charge.
C. Oracle VM Server license and support contract is purchased for each server. Oracle VM Manager license and support contract is purchased for each server.
D. Oracle VM Server license and support contract is purchased for each server. Oracle VM Manager license and support contract is purchased for one server.
E. Oracle VM Serversupport contract is purchased for each server. Oracle VM Manager support is purchased for one server.
Answer:
B
User Votes:
A
50%
B
50%
C
50%
D
50%
E
50%
Discussions
0/ 1000
Question 9
A virtual machine is copied onto portable media and transferred to another machine In a different server pool. The virtual machine is then run on the new host, but it falls to boot. What are two potential problems?
A. The virtual machine was not exported properly using the Oracle VM Manager.
B. The virtual machine configuration file needs to be changed to update the new pathsto its virtualdisks.
C. The virtual machine configuration file lists bridges that do not exist on the new host.
D. The virtual machine has not been registered with Oracle VM yet.
Answer:
A,D
User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
0/ 1000
Question 10
Which disk protocol is the default disk type for disks in a paravirtualized guest?
A. HD (IDE)
B. SD (SCSI)
C. XVD
D. RAW
Answer:
A
User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
0/ 1000
Question 11
When an Oracle VM server starts, by default how does it map physical NICs to Xen bridges?
A. Each physical NIC is mapped to one or more virtual networks, each of which is assigned a Xen bridge.
B. One Xen bridge will be created for each physical NIC.
C. All physical NICs are mapped to a single Xen bridge.
D. No mapping of physical NICs to Xen bridges is done by default.
E. The first physicalNIC is assigned to dom0's management; a Xen bridge is then created for each of the remaining cards.
Answer:
B
User Votes:
A
50%
B
50%
C
50%
D
50%
E
50%
Discussions
0/ 1000
Question 12
In hardware virtualized environment, which answer best describes the drivers that are used in dom0 and the guest to communicate block I/O requests?
A. QEMU emulation is used in dom0, and a blkfront driver is used in the guest.
B. A native device driver is used in dom0, and QEMU emulation is used in the guest.
C. A blkfront driver is used in dom0, and a blkback driver is usedin the guest
D. QEMU emulation is used in dom0, and a native device driver is used in the guest.
E. Native drivers are used in both dom0, and the guest.
Answer:
A
User Votes:
A
50%
B
50%
C
50%
D
50%
E
50%
Discussions
0/ 1000
Question 13
What two steps are required to create a root repository in an Oracle VM server pool?
A. Use the repos.py command with the --new option, along with either a device path or an nfs path.
B. Use the repos.py command with the --new option, along with the UUID assigned to the repository.
C. Use the repos.py command with the--newoption, along with the UUID assigned to the repository and a device path.
D. Use the repos.py command with the path. root option, along with either a device path or an nfs path.
E. Use the repos.py command with the--root option, along with the UUID assigned to the repository.
Answer:
A,E
User Votes:
A
50%
B
50%
C
50%
D
50%
E
50%
Discussions
0/ 1000
Question 14
When converting hardware virtualized machine to full PV, the guest falls to boot. What line in vm.cfq is likely leftover from the HVM configuration? A. vnclisten = '0.0.0.0' B. pae =1 C. builder=hvm D. serial=pty
Answer:
C My suggestion is to use builder=hvm because it works fine for once I have failed to booting the server but when I made it builder=hvm it booted fine. Another thing is if you use linux os as amother os then you can leftover this builder=hvm but if you use windows2003 then you have to use builder=hvm.
Discussions
0/ 1000
Question 15
In hardware virtualized environment, which answer best describes the drivers that are used in dom0 and the guest to communicate network I/O requests?
A. QEMU emulation is used in dom0, and a netfront driver is used in the guest.
B. A native device driver is used in dom0, and QEMU emulation is used in the guest.
C. A netfront driver is used in dom0, and a netback driveris used in the guest.
D. QEMU emulation is used in dom0, and a native device driver is used in the guest.
E. Native drivers are used in both dom0 and the guest